Tacacs-Server Source-Ipv6 - Cisco 300 Series Cli Manual
Small business 300 series managed switches
command line interface guide release 1.3
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
TACACS+ Commands
78-21075-01 Command Line Interface Reference Guide
User Guidelines
If the configured IP source address has no available IP interface, an error message
is issued when attempting to communicate with the IP address.
Example
The following example specifies the source IP address for all TACACS+ servers.
switchxxxxxx(config)#
19.5
tacacs-server source-ipv6
Use the tacacs-server source-ipv6 Global Configuration mode command to
configure the source IPv6 address to be used for communication with TACACS+
servers.
Use the no form of this command to restore the default configuration.
Syntax
tacacs-server source-ipv6 {source}
no tacacs-server source-ipv6 {source}
Parameters
source—Specifies the source IPv6 address.
Default Configuration
The default source IP address is the outgoing IP interface address.
Command Mode
Global Configuration mode
User Guidelines
If the configured IP source address has no available IP interface, an error message
is issued when attempting to communicate with the IP address.
tacacs-server source-ip
172.16.8.1
19
285
Advertisement
Table of Contents
