Dot1X Timeout Quiet-Period - Cisco 300 Series Cli Manual
Small business 300 series managed switches
command line interface guide release 1.3
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
22
802. 1 X Commands
Example
The following command manually initiates re-authentication of 802.1X-enabled
gi15.
switchxxxxxx#
dot1x re-authenticate gi15
22.7
dot1x timeout quiet-period
Use the dot1x timeout quiet-period Interface Configuration (Ethernet) mode
command to set the time interval that the device remains in a quiet state following
a failed authentication exchange (for example, the client provided an invalid
password). Use the no form of this command to restore the default configuration.
Syntax
seconds
dot1x timeout quiet-period
no dot1x timeout quiet-period
Parameters
seconds—Specifies the time interval in seconds that the device remains in a quiet
state following a failed authentication exchange with the client. (Range: 0–65535
seconds)
Default Configuration
The default quiet period is 60 seconds.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
During the quiet period, the device does not accept or initiate authentication
requests.
The default value of this command should only be changed to adjust to unusual
circumstances, such as unreliable links or specific behavioral problems with
certain clients and authentication servers.
To provide faster response time to the user, a smaller number than the default
value should be entered.
324
78-21075-01 Command Line Interface Reference Guide
Advertisement
Table of Contents
