Dot1X Guest-Vlan Timeout - Cisco 300 Series Cli Manual
Small business 300 series managed switches
command line interface guide release 1.3
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
22
802. 1 X Commands
switchxxxxxx(config-if)#
dot1x guest-vlan
22.20 dot1x guest-vlan timeout
Use the dot1x guest-vlan timeout Global Configuration mode command to set the
time delay between enabling 802.1X (or port up) and adding a port to the guest
VLAN. Use the no form of this command to restore the default configuration.
Syntax
timeout
dot1x guest-vlan timeout
no dot1x guest-vlan timeout
Parameters
timeout—Specifies the time delay in seconds between enabling 802.1X (or port
up) and adding the port to the guest VLAN. (Range: 30–180)
Default Configuration
The guest VLAN is applied immediately.
Command Mode
Global Configuration mode
User Guidelines
This command is relevant if the guest VLAN is enabled on the port. Configuring the
timeout adds delay from enabling 802.1X (or port up) to the time the device adds
the port to the guest VLAN.
Example
The following example sets the delay between enabling 802.1X and adding a port
to a guest VLAN to 60 seconds.
switchxxxxxx(config)#
60
dot1x guest-vlan timeout
340
78-21075-01 Command Line Interface Reference Guide
Advertisement
Table of Contents
