Switchport Customer Multicast-Tv Vlan - Cisco 300 Series Cli Manual
Small business 300 series managed switches
command line interface guide release 1.3
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
Virtual Local Area Network (VLAN) Commands
78-21075-01 Command Line Interface Reference Guide
Default Configuration
Receiving Multicast transmissions is disabled.
Command Mode
Interface Configuration (Ethernet, Port-channel) mode
User Guidelines
The user cannot transmit Multicast transmissions on the Multicast TV VLAN.
A Multicast TV VLAN cannot be enabled if a Guest VLAN is enabled on the
interface.
Example
The following example enables gi5 to receive Multicast transmissions from VLAN
11.
switchxxxxxx(config)#
switchxxxxxx(config-if)#
32.30 switchport customer multicast-tv vlan
Use the switchport customer multicast-tv vlan Interface Configuration mode
command to enable receiving Multicast transmissions from a VLAN that is not the
customer port's VLAN, while keeping the L2 segregation with subscribers on
different customer port VLANs.
Syntax
switchport customer multicast-tv vlan
Parameters
•
vlan-list
add
—Specifies a list of Multicast TV VLANs to add to interface.
•
vlan-list
remove
interface.
Default Configuration
The port is not a member in any Multicast TV VLAN.
interface gi5
switchport access multicast-tv vlan
{add vlan-list | remove vlan-list}
—Specifies a list of Multicast TV VLANs to remove from
32
11
521
Advertisement
Table of Contents
