Cdp Mandatory-Tlvs Validation - Cisco 300 Series Cli Manual
Small business 300 series managed switches
command line interface guide release 1.3
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
36
580
•
0 - The CDP packets transmitting through this port would contain Appliance
VLAN-ID TLV with value of 0. VoIP and related packets are expected to be
sent and received with VLAN-id=0 and an 802.1p priority.
•
1..4094 - The CDP packets transmitting through this port would contain
Appliance VLAN-ID TLV with N. VoIP and related packets are expected to
be sent and received with VLAN-ID=N and an 802.1p priority.
•
4095 - The CDP packets transmitting through this port would contain
Appliance VLAN-ID TLV with value of 4095. VoIP and related packets are
expected to be sent and received untagged without an 802.1p priority.
•
4096 - The CDP packets transmitting through this port would not include
Appliance VLAN-ID TLV; or, if the VVID is not supported on the port, this MIB
object will not be configurable and will return 4096.
Example
switchxxxxxx
(config) cdp appliance-tlv enable
36.6
cdp mandatory-tlvs validation
Use the cdp mandatory-tlvs validation Global Configuration mode command to
validate that all mandatory (according to CDP protocol) TLVs are present in
received CDP frames. The no format of this command disables the validation.
If the mandatory TLVs are not included in the packet, it is deleted.
Syntax
cdp mandatory-tlvs validation
no cdp mandatory-tlvs validation
Parameters
N/A
Default Configuration
Enabled.
Command Mode
Global Configuration mode
78-21075-01 Command Line Interface Reference Guide
CDP Commands
Advertisement
Table of Contents
