Ipv6 Mld Snooping Vlan Forbidden Mrouter - Cisco 300 Series Cli Manual
Small business 300 series managed switches
command line interface guide release 1.3
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
39
658
You can execute the command before the VLAN is created and for a range of ports
as shown in the example.
Example
switchxxxxxx(config)interface gi1/1/1
switchxxxxxx(config-if)# ipv6 mld snooping vlan 1 mrouter interface gi1/1/1 -
10
39.6
ipv6 mld snooping vlan forbidden mrouter
Use the ipv6 mld snooping vlan forbidden mrouter Global Configuration mode
command to forbid a port from being defined as a Multicast router port by static
configuration or by automatic learning. Use the no form of this command to remove
the configuration.
Syntax
vlan vlan-id
ipv6 mld snooping
no ipv6 mld snooping
Parameters
•
vlan-id—Specifies the VLAN.
•
interface-list—Specifies list of interfaces. The interfaces can be from one of
the following types: Ethernet port or Port-channel.
Default Configuration
No forbidden ports by default
Command Mode
Global Configuration mode
User Guidelines
A port that is forbidden to be defined as a Multicast router port (mrouter port)
cannot be learned dynamically or assigned statically.
The
bridge multicast forward-all
dynamic learning of Multicast router ports.
forbidden mrouter
vlan vlan-id
forbidden mrouter
command was used in older versions to forbid
78-21075-01 Command Line Interface Reference Guide
IPv6 MLD Snooping Commands
interface interface-list
interface interface-list
Advertisement
Table of Contents
