Cisco 300 Series Cli Manual page 749
Small business 300 series managed switches
command line interface guide release 1.3
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
IPv6 Router Commands
78-21075-01 Command Line Interface Reference Guide
Example 2—The following is sample output from the show ipv6 route command
when IPv6 Routing is supported and the command is entered without an IPv6
address or prefix specified and IPv6 Routing is enabled:
show ipv6 route
Codes: > - Best
I - ICMP Redirect, S - Static, C - Connected,
L - Local(on-link prefixes defined by the ipv6 nd prefix command with on-link
keyword,
O - OSPF intra-area, OIA - OSPF inter-area,
OE1 - OSPF external 1, OE2 - OSPF external 2,
[d/m]: d - route's distance, m - route's metric
IPv6 Routing Table - 5 entries
B>
3000::/64 [20/0]
via FE80::A8BB:CCFF:FE02:8B00
OE1> 4000::2/128 [0/0]
via FE80::A8BB:CCFF:FE02:8B01
O>
4000::/64 [0/0]
via FE80::A8BB:CCFF:FE02:8B02
C>
4001::/64 [0/0]
via ::
VLAN 100
L>
4002::/64 [0/0]
via ::
VLAN 100 Lifetime 9000 sec
Example 3—The following is sample output from the show ipv6 route command
when entered with the IPv6 prefix 2001:200::/35 and IPv6 Routing is supported:
show ipv6 route 2001:200::/35
Codes: > - Best
I - ICMP Redirect, S - Static, C - Connected,
L - Local(on-link prefixes defined by the ipv6 nd prefix command with on-link
keyword,
VLAN 100
VLAN 101
VLAN 101
44
749
Advertisement
Table of Contents
