Wrr-Queue Cos-Map - Cisco 300 Series Cli Manual
Small business 300 series managed switches
command line interface guide release 1.3
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
Quality of Service (QoS) Commands
78-21075-01 Command Line Interface Reference Guide
no police aggregate
Parameters
aggregate-policer-name—Specifies the aggregate policer name.
Command Mode
Policy-map Class Configuration mode
User Guidelines
An aggregate policer can be applied to multiple classes in the same policy map.
An aggregate policer cannot be applied across multiple policy maps or interfaces.
Use the exit command to return to the Configuration mode. Use the end command
to return to the Privileged EXEC mode.
Example
The following example applies the aggregate policer called Policer1 to a class
called class1 in a policy map called policy1 and class2 in policy map policy2.
switchxxxxxx(config)#
exceed-action drop
switchxxxxxx(config)#
switchxxxxxx(config-pmap)#
switchxxxxxx(config-pmap-c)#
switchxxxxxx(config-pmap-c)#
switchxxxxxx(config-pmap)#
switchxxxxxx(config)#
switchxxxxxx(config-pmap)#
switchxxxxxx(config-pmap-c)#
49.17 wrr-queue cos-map
Use the wrr-queue cos-map Global Configuration mode command to map Class of
Service (CoS) values to a specific egress queue. Use the no form of this command
to restore the default configuration.
aggregate-policer-name
qos aggregate-policer
policy1
policy-map
class
class1
police aggregate
exit
exit
policy-map
policy2
class2
class
police aggregate
policer1 124000 9600
policer1
policer1
49
811
Advertisement
Table of Contents
