Ip Dhcp Pool Network - Cisco 300 Series Cli Manual
Small business 300 series managed switches
command line interface guide release 1.3
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
DHCP Server Commands
78-21075-01 Command Line Interface Reference Guide
Default Configuration
DHCP hosts are not configured.
Command Mode
Global Configuration mode
User Guidelines
During execution of this command, the configuration mode changes to the DHCP
Pool Configuration mode, which is identified by the (config-dhcp)# prompt. In this
mode, the administrator can configure host parameters, such as the IP subnet
number and default router list.
Example
The following example configures station as the DHCP address pool:
Console(config)#
ip dhcp pool host
Console(config-dhcp)#
53.3
ip dhcp pool network
Use the ip dhcp pool network Global Configuration mode command to configure a
DHCP address pool on a DHCP Server and enter DHCP Pool Configuration mode.
Use the no form of this command to remove the address pool.
Syntax
ip dhcp pool network
no ip dhcp pool network
Parameters
name—Specifies the DHCP address pool name. It can be either a symbolic string
(such as 'engineering') or an integer (such as 8). (Length: 1–32 characters)
Default Configuration
DHCP address pools are not configured.
Command Mode
Global Configuration mode
User Guidelines
During execution of this command, the configuration mode changes to DHCP Pool
Network Configuration mode, which is identified by the (config-dhcp)# prompt. In
station
name
name
53
875
Advertisement
Table of Contents
