Table of Contents
Advertisement
coffee.
C4.
icon: to deliver two cups of espresso
coffee.
C5.
OK icon: to enable and confirm the selected
function.
C6.
icon: to rinse or deliver hot water.
C7.
MILK icon: to deliver a cup of milk.
C8.
LATTE MACCHIATO icon: to deliver a cup
of macchiato.
C9.
LONG icon: to deliver a cup of LONG
coffee.
C10. CAPPUCCINO
icon:
cappuccino.
C11. CAFFELATTE icon: to deliver a caffelatte.
C12. P icon: to access the Programming
menu.
C13. ESC icon: to exit the selected function.
C14.
icon: to select the coffee taste.
C15.
icon: to select the coffee quantity.
C16.
icon: to scroll backwards through the
programming menu.
Please note :
A light touch is enough to activate the icon.
PRELIMINARY CHECKS
Checking the appliance
After removing the packaging, make sure the
product is complete and undamaged and that all
accessories are present.
Do not use the appliance if it is visibly damaged.
Contact Customer Services (see enclosed
guarantee leaflet).
Installing the appliance
Important!
When you install the appliance, you should follow
the following safety warnings:
the appliance on the worktop, leave a space
of at least 3 cm between the surfaces of the
appliance and the side and rear walls and at
least 15 cm above the coffee maker.
damage. Do not place the appliance near
taps or sinks.
water it contains freezes. Do not install the
appliance in a room where the temperature
could drop below freezing point.
Connecting the appliance
Check that the mains power supply voltage
corresponds to the value indicated on the rating
plate on the bottom of the appliance.
to
deliver
a
Connect the appliance to an efficiently earthed
and correctly installed socket with a minimum
current rating of 10A only.
If the power socket does not match the plug on
the appliance, have the socket replaced with a
suitable type by a qualified professional.
Using the coffee maker for the first time
1. Plug the appliance into the mains socket
You must first choose the language (the
languages scroll through at intervals of about 3
seconds).
2. When English appears, press the OK icon for
Procedere quindi seguendo le istruzioni indicate
dall'apparecchio stesso:
Follow the instructions indicated by the
appliance:
3. "FILL TANK!": remove the water tank, fill to
4. "Insert water spout and press OK": Check
10
it cannot be damaged by sharp edges or
contact with hot surfaces (e.g. electric hot
plates).
Important!
Please note :
appliance and it is therefore completely
normal for there to be traces of coffee in the
mill.
The machine is, however, guaranteed to be
new.
soon as possible following the instructions
in the section "Setting water hardness" on
page 18.
and place the main switch on the back of the
appliance in the I position (fig. 1).
a few seconds (fig. 2). Once the language
has been saved, the message "English set"
is displayed.
the MAX line with fresh water then replace in
the appliance (fig. 3).
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
