Table of Contents
Advertisement
container, a little hot water leaks out of the
frothed milk tube (B5).
Avoid contact with splashes of water.
When "Press CLEAN button" flashes on the
display (each time you use a milk function):
1. Leave the milk container in the machine (you
do not need to empty it);
2. Place a cup or other recipient under the
frothed milk spout.
3. Press the CLEAN button (fig. 33) and keep
pressing until the progress bar which
appears on the display together with the
message "Cleaning..." is complete.
4. Remove the milk container and always clean
the nozzle with a sponge (fig. 34).
Nota Bene!
display, you can still prepare any type of
coffee or milk. If you have to make a number
of drinks with milk, wait until you have
delivered the last cup before cleaning the
container.
the refrigerator.
the appliance to heat up, holding the CLEAN
button down.
Programming the quantities of coffee and milk
in the cup
The appliance is set by default to automatically
deliver standard quantities.
To change these quantities, proceed as follows:
1. Place a cup under the coffee spouts and milk
spout.
2. Press the icon corresponding to the function
you want to programme (CAFFELATTE,
CAPPUCCINO, LATTE MACCHIATO or MILK)
until "Milk for... Program quantity" appears
on the display and the icon corresponding to
the selected function flashes.
3. Release the icon. The appliance starts
delivering milk.
4. When the required quantity of milk has been
delivered into the cup, press the icon again.
5. After a few seconds, the appliance starts
delivering coffee into the cup and the
message "Coffee for... Program quantity" is
displayed (with the exception of the MILK
function) and the
6. As soon as the coffee in the cup reaches the
required level, press the
delivery stops.
The machine is now reprogrammed with the new
quantities.
HOT WATER
Preparation
Important! Danger of burns.
Never leave the machine unsupervised while
delivering hot water.
The hot water spout becomes hot while water
is delivering and must be handled by the handle
only.
1. Make sure the hot water spout is attached
correctly (fig. 4).
2. Place a container under the spout (as close
as possible to avoid splashes).
3
Press the
"Rinsing" "Hot water..." is displayed.
4. Press the
function (a flashing arrow appears alongside
the selected message on the display) and
confirm the selection by pressing the OK
icon (or cancel the selection by pressing the
ESC icon).
5. Water flows out of the spout. Delivery stops
automatically after 250ml.
6. To interrupt delivery of hot water manually,
press the
Please note!
could be delayed a few seconds.
Changing the quantity
The appliance is set by default to automatically
deliver 250ml of hot water. To modify these
quantities, proceed as follows:
1. Position a container under the spouts.
2. Once the "Hot Water" function has been
selected, keep pressing the OK icon until
"Hot Water Program Quantity" appears and
the
icon flashes.
3. When the hot water in the cup reaches the
required level, press the
17
icon flashes.
icon. Coffee
icon (fig. 35). The message
icon to select the "Hot Water..."
icon again.
icon again.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
