Table of Contents
Advertisement
DISPLAYED MESSAGES
DISPLAYED MESSAGE
FILL TANK !
GROUND TOO FINE
ADJUST MILL!
Insert water spout and
press OK
INSERT WATER
SPOUT!
EMPTY GROUNDS
CONTAINER!
INSERT GROUNDS
CONTAINER
ADD PRE-GROUND
COFFEE
DESCALE!
LESS COFFEE!
FILL BEANS
CONTAINER!
INSERT INFUSER
ASSEMBLY!
INSERT MILK
CONTAINER
CLOSE DOOR!
PRESS CLEAN
BUTTON
POSSIBLE CAUSE
delivered too slowly.
inserted incorrectly.
more than 3 days have passed since you
last made coffee (this guarantees correct
hygiene of the machine).
has not been replaced.
been selected without placing any pre-
ground coffee in the funnel.
cleaning.
correctly.
tubes inside the milk container must be
cleaned.
REMEDY
correctly, pushing it as far as it will go
until it clicks into place (fig. 3).
grinding adjustment knob one click
clockwise towards "7" while the coffee
mill is in operation. If after making at
least 2 coffees delivery is still too slow,
repeat the correction procedure, turning
the grinding adjustment knob another
click until delivery is correct.
then replace. Important: when removing
the drip tray, the grounds container
must be emptied, even if it contains
few grounds. If this is not done, when
you make the next coffees, the grounds
container may fill up more than expected
and clog the machine.
tray and insert the grounds container.
deselect the "pre-ground" function.
the "Descaling" section needs to be
performed as soon as possible.
quantity of pre-ground coffee.
as described in the section "Cleaning the
pre-ground coffee funnel".
paragraph "Cleaning the infuser".
go.
pressed until the progress bar which
appears on the display together with the
message "Cleaning..." is complete.
22
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
