Table of Contents
Advertisement
DISPLAYED MESSAGE
ADD PRE-GROUND
COFFEE
Press OK
Energy Saving
GENERAL ALARM!
TROUBLESHOOTING
Below is a list of some of the possible problems.
If the problem cannot be resolved as described, contact a Customer Service.
PROBLEM
The coffee is not hot
The coffee is not
creamy enough.
The coffee is delivered
too slowly or a drop at
a time.
The coffee does not
come out of the spouts,
but from around the
service door.
The coffee is delivered
too quickly.
POSSIBLE CAUSE
been selected without placing any pre-
ground coffee in the funnel.
electricity consumption.
POSSIBLE CAUSE
2/3 minutes have elapsed since the last
coffee was made.
dry coffee deposits.
is blocked and cannot swing.
23
REMEDY
as described in the section "Cleaning the
pre-ground coffee funnel".
thoroughly, as described in the section
"Cleaning and maintenance". If the
message is still displayed after cleaning,
contact a Customer Service.
SOLUTION
least 20 minutes to warm up.
water (using the hot water function).
infuser by pressing the
the sections "Tips for a hotter coffee").
menu.
click anticlockwise towards "1" while
the coffee mill is in operation (fig. 8).
Continue one click at a time until coffee
delivery is satisfactory. The effect is only
visible after delivering 2 coffees.
makers.
one click clockwise towards "7" while
the coffee mill is in operation (fig. 11).
Continue one click at a time until coffee
delivery is satisfactory. The effect is only
visible after delivering 2 coffees.
sponge or hard bristled kitchen brush.
particularly near the hinges.
Turn the grinding adjustment knob one
click anticlockwise towards "1" while the
coffee mill is in operation (fig. 11). Avoid
turning the grinding adjustment knob
excessively otherwise when you select
two cups, the coffee may be delivered a
drop at a time.
icon (see
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
