ElECTRICAl REqUIREMENTS Before using this appliance ensure that the voltage indicated on the product corresponds with the main voltage in your home, if you are in any doubt about your supply contact your local electricity company. The flexible mains lead is supplied connected to a B.S. 1363 fused plug having a fuse of 13 amp capacity. Should this plug not fit the socket outlets in your home, it should be cut off and replaced with a suitable plug, following the procedure outlined below.
CONTENTS MAKING DRINKS WITH MIlK........12 Filling and attaching the milk container ......... 12 ElECTRICAl REqUIREMENTS ........2 Making cappuccino ..............12 Making frothed milk ............... 13 INTRODUCTION ............7 Cleaning the milk container after use ........13 Symbols used in these instructions ........... 7 Programming the quantities of coffee and milk in the cup ..
INTRODUCTION SAFETY Thank you for choosing the automatic coffee and cappuccino Fundamental safety warnings maker. danger! We hope you enjoy using your new appliance. This is an electrical appliance and may therefore cause electric Take a few minutes to read these instructions. shock.
DESCRIPTION environments; • farm houses Description of the appliance • by clients in hotels, motels and other residential type (page 3 - A ) environments grinding adjustment knob • bed and breakfast type environments. Beans container Beans container lid INSTRUCTIONS Central pre-ground coffee lid read these instructions carefully before using the appliance. Measure compartment Failure to respect these instructions may result in burns or Cup shelf (cup warmer active when energy Saving is...
(When in the settings MENU: OK button, press to confirm Connect the appliance to an efficiently earthed and correctly the selection made). installed socket with a minimum current rating of 10a only. button: to deliver one or two cups of long coffee. if the power socket does not match the plug on the appliance, button: to deliver one or two cups of standard have the socket replaced with a suitable type by a qualified coffee.
The appliance is ready for use only after completion of this The time displayed when the machine is off (stand-by) is now set. cycle. danger of burns! Turning on during rinsing, a little hot water comes out of the coffee spouts once “auTo-STarT yes”...
Off after (Stand-by) (fig. 8) according to the following table: The appliance is set by default to go off if not used for two Corresponding coffee qUANTITY (Ml) hours. 40 (programmable from 20 ShorT The time can be changed so that the appliance switches off to 180) after 15 or 30 minutes, or after 1, 2 or 3 hours.
Making coffee using pre-ground coffee and is collected in the drip tray underneath. avoid contact with splashes of water. important! • Never add pre-ground coffee when the machine is off or it For hotter coffee, before making the coffee rinse the appliance could spread through the inside of the machine and dirty by pressing the button.
Programming the quantities of coffee and milk in the spout. 2. Press the button (fig. 21). The appliance now displays: “CaPPuCCino”. The appliance is set by default to automatically deliver standard after a few seconds, frothed milk flows out of the milk quantities.
ClEANING The drip tray is fitted with a level indicator (red) showing the level of water it contains (fig. 26). Cleaning the coffee maker Before the indicator protrudes from the cup tray, the drip tray The following parts of the machine must be cleaned regularly: must be emptied and cleaned.
All components can be washed in a dishwasher, 1. Make sure the machine is correctly turned off (see Turning off, page 10). placing them in the top basket of the dishwasher. 2. open the service door (fig. 24). Make sure there are no milk residues left inside the holes. 3.
3. Press the OK button to confirm the setting. 7. The appliance is now ready for rinsing through with 4. Press the MENU button to exit the menu. The light on the clean water. remove the water tank, empty, rinse under button goes off.
DISPlAYED MESSAGES DISPlAYED MESSAGE POSSIBlE CAUSE SOlUTION Fill TanK • Insufficient water in the tank. • Fill the tank with water and/or insert it correctly, pushing it as far as it will go until it clicks into place. ground Too Fine adJuST • The grinding is too fine and the coffee is delivered • Repeat coffee delivery and turn the grinding too slowly or not at all.
TROUBlESHOOTING Below is a list of some of the possible malfunctions. if the problem cannot be resolved as described, contact a Service Centre. PROBlEM POSSIBlE CAUSE SOlUTION The coffee is not hot • The cups were not preheated. • Leave the cups on the cup warmer at least 20 minutes to warm up. •...