free hit counter
Download
Share
Print this page
  1. Manuals
  2. Brands
  3. UBI Manuals
  4. Label Maker
  5. EasyCoder 501 SA
  6. Installation instructions manual

UBI EasyCoder 501 Installation Instructions Manual

Fan fold kit
Hide thumbs Also See for UBI EasyCoder 501:
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual See also: Service Manual, Instruction and Installation Manual
UBI EasyCoder 501 – Installation Instructions
FAN FOLD KIT
Description
UBI EasyCoder 501
Fan Fold Kit
Installation Instructions
Edition 1, March 1995
Article No. 1-960392-00
In addition to the internal paper roll, the EasyCoder 501 printer
family can also use thermal paper or receiving face material from
an external supply, e.g. an external paper roll or a stack of fan-folded
tickets. The paper is inserted into the printer through either the upper
or lower slot in rear plate.
It is important that the paper web is properly aligned in parallel with
the printer's centre-line wall. Therefore, UBI offers an optional
"Fan Fold Kit" made up by three main units:
One Fan Fold Guide consisting of:
• 1 Fan Fold Guide
• 1 Inner Guide
• 1 Outer Guide
×
• 2 Screws MRT 4
Two Guide Shafts, each consisting of:
• 1 Break Shaft
• 2 Guide Rolls
×
• 1 Screw MRT 4
8 FZB
Information in this manual is subject to change without prior notice
and does not represent a commitment on the part of UBI Printer AB.
© Copyright UBI Printer AB, 1995. All rights reserved. Published
in Sweden.
EasyCoder is a trademark of United Barcode Industries (UBI)
Torx is a registered trademark of Camcar Division of Textron Inc.
6 FZB
1

Advertisement

loading

Related Manuals for UBI UBI EasyCoder 501

Summary of Contents for UBI UBI EasyCoder 501

  • Page 1 • 1 Screw MRT 4 8 FZB Information in this manual is subject to change without prior notice and does not represent a commitment on the part of UBI Printer AB. UBI EasyCoder 501 © Copyright UBI Printer AB, 1995. All rights reserved. Published Fan Fold Kit in Sweden.
  • Page 2 UBI EasyCoder 501 – Installation Instructions FAN FOLD KIT, cont'd. Description, cont'd. The guide bracket with its two guides is assembled before delivery and can be fitted in either the upper or lower slot in the rear plate by means of two screws. The outer guide is adjustable for different paper widths.
  • Page 3 UBI EasyCoder 501 – Installation Instructions FAN FOLD KIT, cont'd. Installation – The guide bracket with the two guides can be fitted either at the Fan Fold Guides upper or lower slot in the rear plate, depending on how the paper supply is located in relation to the printer.
  • Page 4 UBI EasyCoder 501 – Installation Instructions FAN FOLD KIT, cont'd. Installation – The rear guide shaft is already fitted on all printers equipped with Rear Guide Shaft a paper rewind kit. However, in this case there are no guide rolls on the shaft.
  • Page 5 UBI EasyCoder 501 – Installation Instructions FAN FOLD KIT, cont'd. Installation – In demanding applications, e.g. when using a cutter and/or ribbon Front Guide Shaft save device, further guiding of the paper web may be required. In EasyCoder 501 printers, the existing guide shaft needs to be moved to a lower position as to better guide the paper web in combination with the rear guide shaft.
  • Page 6 UBI EasyCoder 501 – Installation Instructions FAN FOLD KIT, cont'd. Paper Load Instructions Load the paper web according to the illustrations below. Note that the external supply should be protected from dust, sand, git and other particles that may damage the printhead or impair the printout quality.