Maintenance; Maintenance Schedule - Husqvarna RZ3016 Operator's Manual
Zero turn mower
Hide thumbs
Also See for RZ3016:
- Operator's manual (64 pages) ,
- Parts manual (32 pages) ,
- Operator's manual (56 pages)
Table of Contents
Advertisement
Maintenance Schedule
The following is a list of maintenance procedures that must be
performed on the machine. For those points not described in
this manual, visit an authorized service workshop. An annual
service carried out by an authorized service workshop is
Maintenance
Check the park brake
Check the engine's oil level (every refueling)
Check the safety system
Check for fuel and oil leakages
Check/clean the engine's cooling air intake
Check the mower deck
Check for loose hardware (screws, nuts)
Clean under the mower deck
Start the engine and blades, listen for unusual sounds
Check for damage
Thoroughly clean around the engine
Clean around belts, belt pulleys
Check the tire pressures
Check battery
Sharpen/replace mower blades
Clean the engine's cooling air intake
Clean the air cleaner's foam pre-filter
Clean the air cleaner's paper filter cartridge
Check/adjust the park brake
Check/adjust throttle cable
Check the condition of belts, belt pulleys
Change the engine oil
1)
Replace the engine oil filter
Clean/replace the spark plugs
Check the caster wheels (every 200 hours)
Check/adjust the mower deck
Check the engine valve clearance
Perform the 300-hour service
Lubricate according to Lubrication Schedule
●
=
Described in this manual
♦
=
Not described in this manual
■
=
See engine manufacturers' Owners Manual
MAINTENANCE
2)
2)
2)
4)
4)
3,4)
recommended to maintain your machine in the best possible
condition and to ensure safe operation.
Read Maintenance in the Safety section.
At least
once
Daily
each
Before
After
year
●
■
●
♦
■
●
●
●
♦
♦
♦
♦
■
■
■
♦
●
■
■
■
●
♦
♦
●
1)
First change after 5-8 hours. When operating with a heavy load or
at high ambient temperatures, replace every 50 hours.
2)
In dusty conditions, cleaning and replacement are required more
often.
3)
For daily use, the machine should be lubricated twice weekly.
4)
Performed by authorized service workshop.
20
Maintenance interval
in hours
25
50
100
WARNING! Before
performing any service or
adjustment checklist
•
Engage the park brake.
•
Place the Blade-switch in the
disengaged position.
•
Turn the ignition switch to OFF
position and remove the key.
•
Make sure the blades and all
moving parts have completely
stopped.
●
●
●
■
■
■
♦
●
●
■
■
■
●
●
●
●
300
●
♦
♦
●
Hide quick links:
Advertisement
Table of Contents
